BMS HY-30
Versatile, high-yield cementitious grout with a controlled 30-minute gel time. Engineered for void and cavity filling, ground consolidation, and general-purpose grouting applications where fast setting is beneficial.
Technical Properties
Results are periodically verified externally by NATA-accredited laboratories.
Technical Data
BMS HY-30 undergoes regular in-house quality control, including uniaxial compressive strength (UCS) tests on 75 mm dry-cured cubes.
Note: These values are typical of in-house testing conducted on 75 mm cubes mixed using Toowoomba Regional Council potable water and dry-cured in polystyrene moulds at 23°C ambient temperature. Performance-based properties, such as compressive strength, gel time, bleed, etc, are highly-dependent on water-to-solids (w:s) ratios, mixer and pump type, addition of admixtures, and end-user applications and requirements.
| Property | Typical Value | Test Method/Standard |
|---|---|---|
| 2-Hour UCS | 1 MPa | 75 mm cube mixed at 2:1 w:s and dry-cured @ 23°C ambient temperature |
| 1-Day UCS | 2 MPa | 75 mm cube mixed at 2:1 w:s and dry-cured @ 23°C ambient temperature |
| 3-Day UCS | 3 MPa | 75 mm cube mixed at 2:1 w:s and dry-cured @ 23°C ambient temperature |
| 7-Day UCS | 3 MPa | 75 mm cube mixed at 2:1 w:s and dry-cured @ 23°C ambient temperature |
| 28-Day UCS | 4 MPa | 75 mm cube mixed at 2:1 w:s and dry-cured @ 23°C ambient temperature |
BMS HY-30 is a versatile, high-yield cementitious grout engineered for void and cavity filling, ground consolidation, and general-purpose grouting applications where fast setting is beneficial.
With a controlled 30-minute gel time producing steady strength gains at high water-to-solids (w:s) ratios, BMS HY-30 is ideal for situations requiring fast turnaround and reduced downtime, without compromising on pumpability or strength development.
- High-Yield: Optimised w:s ratio for greater volume per tonne. Foaming version available upon request.
- Gel Time: Initial gel time of 30 minutes at 23°C and 2:1 w:s ratio.
- Versatile Application: Suitable for cavity and void filling in mining, tunnelling & civil construction applications.
- Steady Strength Gain: Reliable compressive strength development.
- Safe: Non-toxic and non-flammable.
- • Bulk void and cavity filling in civil and mining works.
- • Backfilling of mine stopes, tunnels, and underground workings.
- • Ground and fractured rock mass stabilisation.
- • Construction of cut-off walls and bulkheads.
- • Typically, 1.0 and 1.2 tonne bulk bags.
- • 20kg paper bags (palletised).
- • Additional packaging options are available on request.
- • All orders include Proof of Dispatch (POD) documentation with batch identification numbers and manufacturing dates for traceability.
Shelf-Life: Best used within 12 months from the date of manufacture when stored as recommended. Grout may be fit for purpose beyond 12 months, subject to assessment of storage conditions and verification testing of grout properties.
Storage Conditions: Store unopened and undamaged packages in a cool, dry environment below 30°C. Shelf-life may decrease if exposed to high humidity, extreme temperatures, or external weather conditions.
- • Cementitious grout dust is an irritant—avoid inhalation or skin/eye contact.
- • Wear protective gloves, clothing, eye and face protection.
- • Ensure adequate ventilation during mixing and application.
- • In case of contact with the eyes, rinse with running water for 15 mins and remove contaminated clothing.
- • Always consult the Safety Data Sheet (SDS) prior to handling or use.
- • In an emergency, contact any Poisons Information Centre (Phone: 13 11 26 within Australia).
- • For detailed safety information, refer to the latest SDS available at www.bmscement.com.
Enquire about BMS HY-30
Please fill out the form below and someone from our team will get back to you as soon as possible.
Need Technical or Installation Support?
BMS Specialty Cements is part of the BMS Group, delivering technical expertise and end-to-end solutions for ground stabilisation and remediation across the mining, tunnelling, and civil construction industries.
Geotechnical Analysis & Design Advice
Our sister company — Blackrock Mining Solutions — is a specialist geotechnical engineering consultancy providing site investigation, numerical analysis & design, and site operational support across a broad range of surface & underground mining, civil construction, and renewable energy projects.
Application & Installation Services
Our sister company — BMS Strata Systems — is a specialist ground stabilisation & remediation contractor, providing cementitious & chemical injection grouting services across the Australian mining, tunnelling, civil construction & dam/water infrastructure sectors.
Together, the BMS Group connects design, manufacture, and application to deliver complete, performance-based solutions for the Australian and international mining, tunnelling, and civil construction industries.
Related Products
Explore other products in our range
Versatile, high-yield cementitious grout with a controlled 10-minute gel time. Engineered for void and cavity filling, ground consolidation, and general-purpose grouting applications where rapid setting is beneficial.
View ProductVersatile, high-yield cementitious grout with a controlled 60-minute gel time. Engineered for void and cavity filling, ground consolidation, and general-purpose grouting applications where fast setting is beneficial.
View Product